Fully Hydraulic Plastic Injection Molding Machine

150MT plastic injection machine, fully hydraulic system, highly clean and tidy, high precision&injection speed, energy saving

Introduction of plastic injection machine 150MT

Model	JPH150C
Screw Model	A	B	C
Screw Diameter	40	45	50
Screw L/D ratio	22	19	17
Shot Volume (PS:cm3)	201	254	314
Shot Weight (PS:g)	181	229	283
Max. Shot Pressure (Mpa)	224	177	144
Shot Speed (g/s)	75	95.2	117
Plasticizing Capacity (g/s)	17.5	19.5	24
Screw Speed (rpm)	190
Clamping Force (kN)	1500
Distance Between Tie Rods (WxH)	410X410
Clamping Stroke (mm)	620
Max. Daylight (mm)	800
Close Daylight (mm)	180
Ejector Force (kN)	45
Ejector Stroke (mm)	150
System Pressure (Mpa)	14.5
Oil tank Capacity (L)	210
Pump Motor (kW)	15
Heating Capacity (kW)	10.12
Machine Weight (kg)	4500
Machine Dimension (m)	4.26X1.28X1.8

A: Clamping system:1. There are four section clamping speeds including fast and slow with lower powerconsumption, stable, low noise 2. Low-pressure mold protection function, both mechanical and electric interlocksafe guarantee 3. Central hydraulic ejecting, jolt ejecting, back ejecting and multi-ejecting canbe realized, speed and pressure can be regulated 4. Four cylinders direct clamping assure that the mold is stressed evenly 5. Double differential mold movement, dispense with need for liquid lubrication andadjustment 6. The opening and closing stroke is precise in repetition by using linear ruler control 7. Super sensitive low pressure mold protection 8. The world famous brand of high pressure resistant seal components and standardhigh precision cylinders are assembled 9. The strokes for ejector and mold movement are lengthened; oil pressure safe protection device is available 10. Twin loose-core oil circuit, mechanical arm and rotary striper can be chosenB: Injection system:1. High-power duplex cylinders injection 2. Torque hydraulic motor imported from Italian famous brand 3. Four sections injection pressure and speed, three sections pressure and speedfor pressure holding 4. Multiple auto temperature control by computer and fault indication-detector areavailable 5. Nozzle plugging and spew can be detected automatically 6. The prevention function with low temperature alarm will stop a fault start incase the material is in an insufficient temperature 7. Back pressure can be regulated, empty hopper alarm will and spew suction prevention function are available 8. Precisely linear position transducer can control injection stroke 9. The screw and barrel are made by high-grade alloy 38CrMoAIA with nitride wear-resistant treatment to ensure the quality and service life 10. PID (proportional integral differential coefficient) temperature control 11. Bimetallic screw and barrel 12. Hydraulic control injection nozzle 13. Power storage high-speed injection C: Control system:1. The electric apparatus and hydraulic parts are world famous brand 2. The pressure and speed are controlled by proportional pressure valve and proportional flow valve 3. The control computer is world famous brand 4. Self-diagnosis function 5. Data such as pressure, speed, time, stroke and temperature can be input directly6. LCD display 7. Production quantity, auto-stop and alarm can be set up 8. The movement of ejector and injection stand controlled by an electric ruler canbe chosen 9. Injection melting, opening and closing can be controlled by a close-loop system10. Various-delivery pump or converter is adopted\

Any further questions  about our plastic injection molding machine,please don't hesitate to write us email  or discuss with us on Trade-manager. 

     FURTHER QUESTIONS,PLS DON'T HESITATE TO WRITE US EMAILS.

Fully Hydraulic Plastic Injection Molding Machine